top of page

2021 AEMT Awards Winners Announced

The Winners of the 2021 AEMT Awards were announced during a Gala Presentation Ceremony in Coventry on Thursday 18th November. Attended by some two hundred people from across the electrical and mechanical trades arena, the evening once again proved to be a wonderful evening of reward and celebration. Having been postponed from its original 2020 dateline due the pandemic, there was a great deal of anticipation ahead of the event with all attendees eager to reunite and re-engage with their colleague and peers.

The evening did not disappoint, with many commenting that it was the best event to date. Not only was the atmosphere electric, fuelled no doubt by the excitement of being at a live ‘in-person’ event, this year’s awards programme again attracted some truly excellent entries across the seven categories, with all the Finalists being deemed to be of the highest quality by the independent judging panel.

The Judging Session, which was this year held virtually via a Zoom Meeting, once again employed comprehensive assessment protocols and a supporting ‘points scoring system’ to determine the Finalists in each category. This process also identified the category Winners, although this information was kept secret until being revealed by the category sponsors during the prestigious Awards Ceremony.

The 2021 AEMT Awards Winners are as follows: -



Menzel Motors: IP67 Motors - Defy Flood Conditions

Developed for remote Water Pumping stations – where accidental flooding can occur – Menzel IP67 Protected Motors are also occasionally used in very harsh industry conditions. These motors are not capable of operating whilst under water due to their external fan, however, as soon as the flooding subsides, they can be started. Testing was supervised and certified by TÜV that motors endured 24 hours under water – without any water entering the motor or terminal box.


Sponsored by EMiR SOFTWARE

Fletcher Moorland: iBOT PCB Card Refurbishment

Due to its commitment to future sustainability, and helping its customers achieve this by finding innovative solutions to their problems, Fletcher Moorland were tasked with finding a way for the online retail giant, Amazon, to repair and reuse circuit boards on their iBOT robots. The iBOT robots are a warehouse picker crucial to efficiency, and each time a PCB board failed, this was thrown away and replaced with new. The company has been able to successfully repair over 600 iBOT cards in under 12 months, saving both money and having a positive impact on Amazon’s carbon footprint by reducing waste.


Sponsored by ABB

ADC Electrical

ADC Electrical are honoured to have been nominated as finalists in the category of service centre of the year. Our small & dedicated team has worked so hard over the last 12 months in very difficult circumstances that have proven to be both physically & mentally challenging to all. Our thanks to every one of them for their efforts. Without them, we would not have achieved our outstanding customer service in the rewind, repair of rotating equipment plus continuing with the development & manufacture of specialised products for the global market. As an industry in general, sometimes we do not always fully appreciate ourselves, what a high level of service we all consistently give to our customers.


Sponsored by DRIVES & CONTROLS

Preformed Windings

Preformed Windings manufacture high voltage coils and armature coils in a state-of-the-art manufacturing facility in Rotherham, UK. Preformed Windings offer the highest quality coils in the world, while maintaining very fast lead times. As a member of the AEMT, we are a trusted partner to the largest OEMs and rewind shops globally while our technical team offer 24/7 service. We are proud to be four-time finalists and now winner of supplier of the year.



EMiR Software

Last year the world was hit with the pandemic, an unprecedented event that affected businesses worldwide. This changed the way we worked and the need to accommodate home working was essential. EMiR Software responded swiftly to this industry need and developed the eMiR-Learning Platform, an online learning solution designed and dedicated for our customer base. We created 10 learning modules that allowed users to log in anywhere and at any time, thus ensuring our customers skills and training levels were kept to an optimum during such difficult times. The eMiR-Learning Platform now boasts over 100 users and 150 certificates have been issued and it is growing every day.


Sponsored by FANUC UK

Jack Rowe, Fletcher Moorland

Jack Rowe is a conscientious and committed employee who has become an integral part of the Fletcher Moorland team over the past 3 years. Jack has developed a huge passion for engineering and has spent time fully immersing himself in the business, going over and above his administration role. Jack goes the extra mile to help his colleagues and demonstrated this when our Workshop Manager was absent from the business due to illness. Jack took on the role to manage time served engineers and went on to identify potential improvements and devise solutions which would contribute to a more efficient workplace, where employees are happy to be. Jack is truly an asset and has a very bright future at Fletcher Moorland.



Joint Winner - Central Group

Founded in 1972, Central Group is a family owned and managed business specialising in the maintenance, repair, and refurbishment of motor, drive and pump systems. Through strong vision and values, and by putting people at the heart of the business it has steadily grown since brothers Tim and Shaun Sutton took control in 2001, following the retirement of their father. Equal opportunities and a strong commitment to continuous personal development has ensured exceptional staff retention and a dedicated and loyal workforce.

Joint Winner - Heasell Electromechanical Services

Heasell has built a reputation for fast, reliable service to all branches of industry, agriculture, and commerce for over 70 years. The company’s industrial department undertakes the installation, maintenance, and repair of all types of electrical, electronic, and mechanical equipment. As an equal opportunities’ employer, a key objective is to maintain a working environment where our customers’ and employees’ needs, and aspirations are anticipated and exceeded on all levels. Developing relationships based on trust, consistency, and respect are core commitments.


Sponsored by AEMT

Tim Marks (Retired)

Tim was presented with this prestigious award for being the person who has probably put more work into the AEMT than anyone else in the history of the organisation, except maybe the founders. He served on the AEMT council in the 80’s and was President of the AEMT twice in the 90’s. At the turn of the millennium Tim became secretary to the association on a part time basis, which very soon became a full-time job. In the 20 years since, the association has grown from strength to strength, and has become a global association representing, promoting, and supporting members from all over the world. It built up a strong pool of reserves under his stewardship which has enabled the association to weather the turbulence we faced last year. He has been convenor of the standards committee which brought us the new and completely overhauled repair standard for rotating machinery; the first standard to mention the circular economy and the importance of considering a repair over a replacement.

Commenting on the awards dinner, Thomas Marks, Secretary and General Manager at the AEMT said, “We were delighted with the entire event from start to finish. The venue, food and drink were all excellent, the stage-set and overall presentation was fantastic, and our after-dinner speaker, Alfie Moore, was simply brilliant. But for me, just seeing so many people from across our sector coming together to recognise and celebrate the excellent work which it collectively conducts every day, is simply wonderful. Sincere congratulations go to each of the Finalists and of course to the eventual Winners.”

Further details

For more information on the 2021 AEMT Awards and to review the image gallery, please visit the dedicated awards website or contact the producers, Touchwave Media on 07785 290034 or by email at

The ‘call for nominations’ for the 2022 awards programme will open in the spring of next year, so if you or your company have a product, project, service or other achievement which you feel is deserving of industry-wide recognition, be sure to submit an entry. The PR value associated with being heralded as a Finalist is highly desirable, but if selected as a Winner, the value is even greater. So, what have you got to lose?


Issued on behalf Association of Electrical and Mechanical Trades (AEMT) by Touchwave Media Ltd

Tel: 07785 290034 Email:

Note to Editors:

About Association of Electrical and Mechanical Trades (AEMT)

The AEMT is the international trade association for all companies who supply, install, service, maintain and repair industrial machinery technology such as electric motors, drives, pumps, fans, gearboxes, generators, transformers, switchgear and ancillary equipment, with well equipped mechanical engineering facilities. The AEMT provides its members with a strong, consolidated voice across the industrial landscape, and the AEMT Awards Programme serves to underpin this key delivery.

Reader Enquiries to:

Thomas Marks

AEMT 2021 Awards

St. Saviours House, St. Saviours Place, York YO1 7PJ Tel: +44 (0) 1904 674895

Email: Web:

Recent Posts
bottom of page